|
|
Polyimide Film (similar to Kapton HN)
|
|
Properties |
Polyimide film
(similar to Kapton HN) is achieved by polycondensation of PMDA
and ODA in strong polar solvents and through the process of
forming film and imine treatment at high temperature, which
possesses excellent physical, chemical, and electrical
properties, atomic radiation resistant, solvent resistant, low &
high temperature resistant, It performs successfully in the wide
range of temperature as low as -452F(-269c) and as high as
+500F(+260c). Because of its unique excellent properties, it is
the most ideal choice in many applications. |
Data Form |
Item |
Properties |
Unit |
Values |
μm |
25 |
40 |
50 |
75 |
100 |
125 |
1 |
Density |
g/cm3 |
1420
±20 |
2 |
Tensile
Strength |
MD ≥ |
MPa |
170 |
165 |
150 |
145 |
130 |
TD ≥ |
165 |
160 |
139 |
130 |
110 |
3 |
Elongation
≥ |
% |
≥50 |
≥60 |
4 |
Shrinkage
(only for reference) |
150℃ 30min
≤ |
% |
0.15 |
400℃ 30min
≤ |
2.0 |
1.9 |
1.8 |
5 |
Breakdown
Strength≥
(48~62Hz) |
Average |
MV/m |
180 |
170 |
160 |
145 |
120 |
115 |
Individual |
140 |
135 |
130 |
120 |
100 |
90 |
6 |
*Surface
Resistance, 200℃ |
Ω |
≥1.0×1013 |
7 |
*Volume
Resistance, 200℃ |
Ω·m |
≥1.0×1010 |
8 |
*Dielectric
Constant 48~62Hz |
--- |
3.5 |
9 |
*Loss
Tangent 48~62Hz |
--- |
≤0.004 |
|
The items marked
* are the inherent properties of Polyimide Film, which
are not showed on the testing report for outgoing factory. |
Specification |
1. Width:
520, 540, 1000mm, or slit into your required width |
2. Thickness (mil/mm): 1.0/0.025; 2.0/0.05; 3.0/0.075; 4.0/0.10;
5.0/0.125; 6.0/0.15; 7.0/0.175 THK tolerance: ±10% |
3. Min Qty:
100kgs/lot, Packing: 25~50 kgs/carton |
Note:
The values noted in above technical specification are given
only for our customers’ reference
and should not be used in writing
specifications. |